en
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0-9

To add favorites to a list, you must be logged in to your account.

Login Register

MAX-800 Series - ethernet and transport testing up to 10G

The MAX-800 Series is an easy-to-use, portable test solution that supports network speeds from 10M to 10G.

Spec sheet (PDF) User manual (PDF)

All products MAX-800 Series - ethernet and transport testing up to 10G
All products MAX-800 Series - ethernet and transport testing up to 10G

Key features

  • Comprehensive testing for DSn/PDH, ISDN, SONET/SDH, OTN and Ethernet interfaces up to 10 Gbit/s
  • Faster Ethernet service activation with EtherSAM (ITU-T Y.1564) service configuration and performance tests, complemented by Remote Discovery, Smart Loopback and Dual Test Set capabilities Read more
  • Dual-port testing up to 10G WAN and LAN, enabling technicians to run up to two independent tests with zero restrictions
  • OTN testing (as per ITU-T G.709), including forward error correction (FEC)
  • Layer-2 transparency testing with predefined configurations
  • Simplified BER testing with pass/fail indicators based on user-defined thresholds

Description

Choose the right network tester for you

MAX-860

  • Ethernet 10/100/1000M electrical
  • Ethernet 100M/1G optical
  • Dual-port testing
  • Fiber inspection probe with ConnectorMax
  • EtherSAM (Y.1564)
  • RFC 2544
  • Multistream traffic generation and monitoring
  • EtherBERT
  • Ethernet Through mode
  • Smart LoopBack
  • Cable test
  • IPv6
  • MPLS

MAX-860G

  • Ethernet 10/100/1000M electrical
  • Ethernet 100M/1G optical
  • Ethernet 10G optical
  • Dual-port testing
  • Fiber inspection probe with ConnectorMax
  • EtherSAM (Y.1564)
  • RFC 2544
  • Multistream traffic generation and monitoring
  • EtherBERT
  • Ethernet Through mode
  • Smart LoopBack
  • Cable test
  • IPv6
  • MPLS

MAX-880

  • Ethernet 10/100/1000M electrical
  • Ethernet 100M/1G optical
  • Ethernet 10G optical
  • Dual-port testing
  • Fiber inspection probe with ConnectorMax
  • EtherSAM (Y.1564)
  • RFC 2544
  • Multistream traffic generation and monitoring
  • EtherBERT
  • Ethernet Through mode
  • Smart LoopBack
  • Cable test
  • IPv6
  • MPLS
  • SONET/SDH (up to 10G)
  • SONET/SDH (electrical)
  • DSn/PDH (DS1/E1)
  • DSn/PDH (DS1/DS3, E1, E3 and E4)
  • OTN

EtherSAM: the standard in Ethernet testing

EXFO’s EtherSAM test suite—based on the ITU-T Y.1564 Ethernet service activation methodology—provides comprehensive field testing for mobile backhaul and commercial services. Aligned with the requirements of today’s Ethernet services, the EtherSAM test methodology drastically speeds up deployment and eliminates repeat testing by offering full visibility into all service-level agreement (SLA) metrics, immediately and accurately. This suite also enables complete validation of all SLA parameters within a single test to ensure optimized quality of service. EtherSAM is comprised of two phases, the service configuration test and the service performance test.

DSn/PDH and legacy SONET/SDH testing

EXFO is a recognized leader in network testers and telecom solutions. With the large, installed base of DSn/PDH and legacy SONET/SDH circuits in access and metro Ethernet networks, testing, troubleshooting and maintenance have become daily tasks.

Covering all DSn/PDH and SONET/SDH interfaces, our ultra-portable MAX-800 Handheld Tester for DSn/PDH and full legacy SONET/SDH is ideally suited to field service deployment, in addition to installation, commissioning and maintenance of access and metro Ethernet networks. This solution offers test functions that range from bit-error-rate (BER) measurements to advanced characterization.

MAX-800 Series - ethernet and transport testing up to 10G

Interested in this product?

  • Request a quote