High speed transmission solutions comparison
EXFO offers a wide range of testing solutions for high-speed transmissions - from electrical to optical with evolutive technologies, scalable up to 1.6T. Each solution is designed to meet your specific needs.
BA-1600 – 1.6T bit analyzer
Description:
- Full lifecycle validation for 1.6T, 800G and 400G testing across lab, fab and live environments
- Validate FEC and monitor Block Error Ratio (BLER)
Key features:
- Signal integrity and BER testing for validating compliance and performance in next-gen 1.6T designs
- FEC generation and analysis testing
- BLER monitoring—an industry first, unique to EXFO
- Support for 8-channels or 4-channels PAM4 coding at data rates of 106.25 GBd (212.5Gbps), 53.125 GBd (106.25Gbps), and 26.5625 GBd (53.125Gbps) per lane
BA-1600-OSFP — 1.6T dual-port bit analyzer
- Test two 1.6T transceivers or an end-to-end high-speed interconnect using the dual OSFP ports
- Delivers up to 3.2T total test capacity with two independent 1.6T OSFP ports for high-speed cable and transceiver validation.
- Full lifecycle validation for 1.6T, 800G and 400G across lab, fab and live environments
- Superior hardware design: native OSFP interfaces, excellent signal quality, clean eye diagram and low error floor
- Real-time FEC generation and analysis: testing of pre/post FEC BER, symbol error distribution and FEC margin
- BLER: block error ratio statistics and efficient FLR estimation mechanism addresses time constraints of ultra-low BER measurements
- PAM4 support for validating high-speed signaling performance
BA-4000 – Electrical 800G bit error rate tester
Description:
- Electric BER tester supporting NRZ and PAM4 coding, with advanced FEC tools and with testing capabilities up to 800G.
Key features:
- Tests 100G (4x28GBd), 400G (4x56GBd) and 800G (8x56GBd)
- Supports NRZ and PAM4
- FEC simulation capabilities provide powerful analysis for burst error
- Test linear-drive pluggable optics (LPO) with the BA-4000-RCNC model
BA-4000-L2 – BER tester with real traffic
Description:
- Combined L1 BER tester and L2 traffic analyzer for 800G DR4/FR4/LR4 and 800G LPO transceivers
Key Features:
- Native electrical interface, excellent signal quality, clean eye diagram and low error floor.
- Layer 2 framed testing: delivers a real system view for L1 device under test (DUT) from L2 framed traffic.
- Layer 1 BERT: excellent signal quality alongside layer 2 testing.
- Real-time FEC analysis: testing of pre/post FEC BER, symbol error distribution and FEC margin.
- Supports breakout cables testing scenarios including 8x 100G and 2x 400G.
FTBx-88810 Series – Lab-to-field testing from 1G to 800G, 800ZR
Description:
- Full-rate coverage from 1G to 800G—supporting Ethernet, OTN, Fibre Channel and coherent optics
Key Features:
- Dual-port from 1G to 800G, including coherent dual 400ZR and Open/ZR+
- Support of the full coherent suit; 800ZR, 400ZR 100ZR and OpenZR ( 400ZR+, 300ZR+, 200ZR+, 100ZR+).
- Multi-protocol coverage: Ethernet, OTN, Fibre Channel.
- Built-in transceiver diagnostics: auto-negotiation, link training, breakout validation.
- Compact and portable—ideal for both lab and field environments.
Schützen auch Sie Ihre Investition mit unseren Premium-Support-Services
Wir bei EXFO fühlen uns verpflichtet, unseren Kunden einen beispiellosen Service zur Verfügung zu stellen. Da wir wissen, wie wichtig Präzision und Zuverlässigkeit für Sie sind, bieten wir eine professionelle Kalibrierung, zuverlässige Reparaturen sowie branchenführende Garantiebedingungen, damit Sie das Leistungspotenzial Ihrer Prüf- und Messtechnik in vollem Umfang ausschöpfen können.
Unsere Serviceleistungen auf einen Blick:
Reparaturen (RMA)
Kalibrierservice
Garantieverlängerung
Individuelle Services
Service-Center
