| Models | T100 1310, T100 1415, T100 1520, T100 1550, T100 1575, T100 1620 |
| Wavelength range (nm) at P = 3 dBm | 1260–1360 (T100 1310); 1360–1470 (T100 1415); 1465–1575 (T100 1520); 1490–1610 (T100 1550); 1520–1630 (T100 1575); 1560–1680 (T100 1620) |
| Wavelength range (nm) at P = 6 dBm | 1290–1340 (T100 1310); 1390–1445 (T100 1415); 1495–1555 (T100 1520); 1520–1590 (T100 1550); 1540–1610 (T100 1575); 1580–1660 (T100 1620) |
| Signal to source spontaneous emission ratioa | ≥ 90 dB / 0.1 nm (typical) |
| Side mode suppression ratio (dB)a | ≥ 45 |
| Stabilityb, c – wavelength | ±0.01 nm/h (±0.01 nm / 24 h typical) |
| Stabilityb, c – output power | ±0.01 dB/h (±0.01 dB / 24 h typical) |
| Relative intensity noised | < –140 dB/Hz |
| Spectral width (FWHM) | 150 kHz typical (coherence control off); > 100 MHz (coherence control on) |
| Wavelength setting accuracy (nm)c | ±0.2 |
| Wavelength setting repeatability (nm) | ±0.01 (typical) |
| Wavelength setting resolution (nm) | 0.01 (0.001 option R) |
| Tuning speed (step-by-step) (nm/s)e, f | 10 (typical) |
| Analog modulation | 50 Hz to 50 MHz (external) |
| Digital modulation | 50 Hz to 1 MHz (internal and external) |
| Optical isolation (dB) | 35 |
| Output fiber type | SMF or PMF (option M) |
| Output connector | FC/APC narrow key |
| Laser safety classification | Class 1M |
| a. Measured over a 0.1 nm bandwidth ±1 nm from the signal. b. At constant temperature. c. Measured at 0 dBm output power. d. RIN within the range 100 MHz–3 GHz measured at 3 dBm output power with RBW = 30 kHz. e. With the high resolution option (R) the tuning speed is 2.5 nm/s typical. f. The laser does not allow for sweep. Specifications apply after 60-minute warm-up and for wavelengths not equal to any water absorption line. | |