| MxN matrix, MXS-9100 optical switch — Optical specifications | |
| Insertion loss3 | 0.8 dB typical 1.4 dB max. |
| Crosstalk | -70 dB typical -55 dB max. |
| Back reflection | -55 dB typical -45 dB max. |
| Switching time | 15 ms typical 20 ms max. |
| WDL4 | 0.3 dB max. for 2x8 to 16x16 0.4 dB max. for 24x24 to 96x96 |
| PDL | 0.08 dB typical 0.25 dB max. |
| Repeatability5 | 0.01 dB typical 0.06 dB max. |
| Optical power | 500 mW max. |
| Operating temperature | 0 to 50 oC |
| Storage temperature | -20 to 60 oC |
| Relative humidity | 0% to 80% non-condensing |
| Fiber type | 9/125 um singlemode |
| Operating wavelength range | 1240 - 1680 nm |
| Singlemode 1xN, MXS-9100 optical switch — Optical specifications | |
| Insertion loss2 | 0.7 dB max |
| Crosstalk | -50 dB max. |
| Back reflection | -50 dB max. |
| Switching time | 30 ms max. |
| WDL3 | 0.5 dB max. |
| PDL | 0.15 dB max. |
| Repeatability4 | 0.02 dB max. |
| Optical power | 500 mW max. |
| Operating temperature | 0 to 50 oC |
| Storage temperature | -20 to 60 oC |
| Relative humidity | 0% to 80% non-condensing |
| Fiber type | 9/125 um singlemode |
| Operating wavelength range | 1240 - 1680 nm |
| Multimode 1xN, MXS-9100 optical switch — Optical specifications | |
| Insertion loss2 | 1x4: 1.3 dB max. 1x8, 50 um: 1.5 dB max. 1x8, 62.5 um: 1.8 dB max. 1x12: 2.0 dB max. |
| Crosstalk3 | 50 um: -25 dB max. 62.5 um: -20 dB max. |
| Back reflection | -20 dB max. |
| Switching time | 30 ms max. |
| Repeatability4 | 0.02 dB max. |
| Optical power | 500 mW max. |
| Operating temperature | 0 to 50 oC |
| Storage temperature | -20 to 60 oC |
| Relative humidity | 0% to 80% non-condensing |
| Fiber type | 50/125 um multimode, or 62.5/125 um multimode |
| Operating wavelength range | 840 - 1330 nm |
| MxN matrix: 1. Specifications referenced without connectors at 23 ± 5 oC. Add 0.2 dB for connector loss. 2. Specifications valid when wavelength is set to the wavelength range in use (C, L, O or U band). 3. Insertion Loss (IL) specification is defined at 1550 nm (C band). Operation at 1310 nm (O band) adds 0.1 dB typical, 0.2 dB max. Operation at 1590 nm (L band) adds 0.1 dB typical, 0.2 dB max. Operation at 1625 nm (U band) adds 0.2 dB typical, 0.4 dB max. 4. WDL is measured in a +/- 20 nm range centered at the set wavelength (1310, 1550, 1590 or 1625 nm). Operation in U band adds 0.1 dB to the max. 5. Repeatability is defined within 100 cycles. Singlemode 1xN: 1. Specifications referenced without connectors at 23 ± 5 oC. Add 0.4 dB for connector loss. 2. Insertion Loss (IL) specification is defined at 1550 nm & 1625 nm. Operation at 1310 nm adds 0.2 dB max. 3. WDL is defined within a wavelength band, and is measured over 1290 - 1330 nm, 1530 - 1570 nm, and 1605 - 1641 nm. 4. Repeatability is defined within 100 cycles. Multimode 1xN: 1. Specifications referenced without connectors at 23 ± 5 oC. Add 0.4 dB for connector loss. 2. Insertion Loss (IL) specification is defined at 850nm & 1310nm and is based upon using a LED source for a full modefill condition. Underfilled sources, such as VCSELs, will have a lower insertion loss. 3. Optical off state isolation is the same as the crosstalk specification. 4. Repeatability is defined within 100 cycles. | |
| Key features | |
| Technology | Proven DiCon MEMS technology |
| Protocol / bit rate | Protocol and bit rate independent |
| Design | High density design, to minimize rack space |
| Reliability | High reliability with lifetime > 109 cycles |
| Remote control | SCPI over ethernet remote control |
| Available configurations | |
| Configuration 1 | MxN Matrix; switch size min 2x8, max 96x96; fiber type: Singlemode |
| Configuration 2 | 1xN Array; switch size min 1x4, max 1x8; fiber type: Singlemode |
| Configuration 3 | 1xN Array; switch size min 1x4, max 1x12; fiber type: Multimode |
| MxN matrix, MXS-9100 — Electrical specifications | |
| Latching type | Non-latching |
| Control type | Ethernet Interface with EXFO SCPI Command Set |
| Supply voltage | AC 100 - 240 V, 50/60 Hz |
| MxN matrix, MXS-9100 — Mechanical specifications (housing size) | |
| 2x8 to 16x16 | Height: 43.65 mm (1U) Width: 483 mm (19”) Depth: 342 mm |
| 24x24 to 32x32 | Height: 88.0 mm (2U) Width: 483 mm (19”) Depth: 434.5 mm |
| 48x48 to 96x96 | Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm |
| MxN matrix, MXS-9100 — Electrical specifications (switch size) | |
| 2-8 | 2 inputs and 8 outputs |
| 2-16 | 2 inputs and 16 outputs |
| 4-4 | 4 inputs and 4 outputs |
| 4-8 | 4 inputs and 8 outputs |
| 4-12 | 4 inputs and 12 outputs |
| 4-16 | 4 inputs and 16 outputs |
| 8-8 | 8 inputs and 8 outputs |
| 8-16 | 8 inputs and 16 outputs |
| 16-16 | 16 inputs and 16 outputs |
| 24-24 | 24 inputs and 24 outputs |
| 32-32 | 32 inputs and 32 outputs |
| 48-48 | 48 inputs and 48 outputs |
| 64-64 | 64 inputs and 64 outputs |
| 96-96 | 96 inputs and 96 outputs |
| Singlemode 1xN, MXS-9100 — Electrical specifications | |
| Latching type | Non-latching |
| Control type | Ethernet Interface with EXFO SCPI Command Set |
| Supply voltage | AC 100 - 240 V, 50/60 Hz |
| Singlemode 1xN, MXS-9100 — Mechanical specifications (chassis size) | |
| 1U | Height: 43.65 mm Width: 483 mm (19”) Depth: 342 mm |
| 2U | Height: 88.0 mm Width: 483 mm (19”) Depth: 434.5 mm |
| 4U | Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm |
| Multimode 1xN, MXS-9100 — Electrical specifications | |
| Latching type | Non-latching |
| Control type | Ethernet Interface with EXFO SCPI Command Set |
| Supply voltage | AC 100 - 240 V, 50/60 Hz |
| Multimode 1xN, MXS-9100 — Mechanical specifications (chassis size) | |
| 1U | Height: 43.65 mm Width: 483 mm (19”) Depth: 342 mm |
| 2U | Height: 88.0 mm Width: 483 mm (19”) Depth: 434.5 mm |
| 4U | Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm |