100G以太网测试 | Max-800系列

全面的DSn/PDH、ISDN、SONET/SDH、OTN和以太网接口测试，速率可达100 Gbit/s

以一流的精准度进行EtherSAM（ITU-T Y.1564）服务配置和性能测试，加快以太网服务激活速度，并支持远程发现、智能环回和双测试设备功能

提供用于4 x 100GE链路的四端口测试功能，使技术人员能够进行四个独立测试

支持OTN测试（依据ITU-T G.709），包括前向纠错（FEC）

采用预定义配置，进行2层透传测试

按照用户定义的阈值，显示通过/未通过状态，简化BER测试

内置多种连接功能，可通过千兆接口、WiFi、蓝牙、3G或4G LTE连接

采用多点触控的8英寸彩色显示屏，提供非常直观的GUI

提供绩效驱动的解决方案，使技术人员能够加快测试配置并迅速生成测试报告

描述

Choose the right network tester for you

The MAX-800 Series offers five different models, each with the features listed below. Additional details are available on the product spec sheet.

All models offer the following features:

Ethernet testing including RFC 2544, EtherSAM ITU-T Y.1564, EtherBERT, traffic generation and monitoring (multistream) and Smart Loopback
Optional IPv6, MPLS, Through mode and dual-port testing

Model specific features:

MAX-860

Ethernet testing up to 1GE

MAX-860G

Ethernet testing up to 10GE

MAX-880

Ethernet testing up to 10GE
Transport network testing up to 10G: DSn/PDH, ISDN, SONET/SDH and optical transport network (OTN)

MAX-890

Ethernet testing up to 100GE
Transport network testing up to 100G: optical SONET/SDH and OTN

MAX-890Q

Ethernet testing up to 100GE
Independent dual-port testing up to 100GE
Optional 4 x 100GE EtherBERT Layer 2 testing
Transport network testing up to 100G including optical SONET/SDH and OTN

EtherSAM: the standard in Ethernet testing

EXFO's EtherSAM test suite—based on the ITU-T Y.1564 Ethernet service activation methodology—provides comprehensive field testing for mobile backhaul and commercial services. Aligned with the requirements of today's Ethernet services, the EtherSAM test methodology drastically speeds up deployment and eliminates repeat testing by offering full visibility into all service-level agreement (SLA) metrics, immediately and accurately. This suite also enables complete validation of all SLA parameters within a single test to ensure optimized quality of service. EtherSAM is comprised of two phases, the service configuration test and the service performance test.

DSn/PDH, SONET/SDH and OTN testing

EXFO is a recognized leader in network testers and telecom solutions. With the large, installed base of legacy DSn/PDH and SONET/SDH circuits in access and metro Ethernet networks, testing, troubleshooting and maintenance have become daily tasks.

Covering all DSn/PDH and SONET/SDH interfaces, our ultra-portable MAX-800 handheld tester for DSn/PDH and full legacy SONET/SDH is ideally suited to field service deployment, in addition to installation, commissioning and maintenance of access and metro Ethernet networks. This solution offers test functions that range from bit-error-rate (BER) measurements, service disruption time (SDT) to advanced characterization.

EXFO has an extensive suite of features for testing optical transport network (OTN) deployments and many of them are also available on the MAX-800 Series. Engineers and technicians can evaluate SLAs based on bit error rate (BER). Additionally, functions such as service disruption time (SDT), round trip delay (RTD) and OTN overhead analysis are readily available making the MAX-800 Series the most versatile portable tester in the industry.