Especificaciones completas

MAX-800 - Ethernet and transport testing up to 100G

Hoja de especificaciones
Hoja de especificaciones
Resumen
The MAX-800 Series comprises five easy to use, portable testing models offering Ethernet, OTN, SONET/SDH, DSn/PDH test applications from 10M to 100G. Optimize your field technicians’ tasks and expedite service activation by running up to four 100GE tests simultaneously.
MAX-800 - Ethernet and transport testing up to 100G

Características principales

  • Comprehensive testing for DSn/PDH, ISDN, SONET/SDH, OTN and Ethernet interfaces up to 100 Gbit/s
  • Faster Ethernet service activation with EtherSAM (ITU-T Y.1564) service configuration and performance tests with best-in-class accuracy, complemented by Remote Discovery, Smart Loopback and Dual Test Set capabilities
  • Quad-port testing up to 4 x 100GE links, enabling technicians to run up to four independent tests
  • OTN testing (as per ITU-T G.709), including forward error correction (FEC)
  • Layer-2 transparency testing with predefined configurations
  • Simplified BER testing with pass/fail indicators based on user-defined thresholds

Especificaciones

Technical specifications
ModelsMAX-860; MAX-860G; MAX-880; MAX-890; MAX-890Q
StorageMAX-860: 64G
MAX-860G: 64G
MAX-880: 64G
MAX-890: 128G
MAX-890Q: 128G
Ethernet 10/100/1000MMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
Ethernet 10/100/1000M and 10GMAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
100GMAX-890: •
MAX-890Q: •
Dual-port testingMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
Quad-port testingMAX-890Q: •
IPv6MAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
MPLSMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
EtherBERTMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
RFC 2544MAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
EtherSAM ITU-T Y.1564MAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
Multistream traffic generationMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
RFC 6349MAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
Carrier OAMMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
Ethernet filter and captureMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
Ethernet Through ModeMAX-860: •
MAX-860G: •
MAX-880: •
MAX-890: •
MAX-890Q: •
SONET/SDHMAX-860G: •
MAX-880: •
MAX-890: •
DSn/PDHMAX-880: •
OTU1, OTU2MAX-860G: •
MAX-880: •
MAX-890: •
OTU4MAX-890: •
MAX-890Q: •
Network interfaces (summary)1 RJ45: 10/100/1000BASE-T
2 SFP/SFP+: Up to 1 Gbit/s (MAX-860); Up to 10 Gbit/s (MAX-860G and MAX-880); 10/100/1000BASE-T with copper SFP; SONET/SDH up to 10G; OTN OTU1/2
QSFP28: 100GE; OTU4
SFP/SFP+: Up to 10 Gbit/s; 10/100/1000BASE-T with copper SFP; SONET/SDH up to 10G; OTN OTU1/2
1 GigE maintenance port
Additional connectors (by model family)MAX-860 / MAX-860G / MAX-880: 3 RJ48C (DSn/PDH); EXT CLK; Micro SD card slot; Mic./Headset jack; USB 3.0 port (1); USB 2.0 port (2)
MAX-880: 4 Bantam (DSn/PDH; RX2: DS1; EXT CLK)a
MAX-880: 5 BNC connectors (Electrical SONET/SDH; DSn/PDH; RX2: DS1/DS3; EXT CLK)
Electrical Ethernet interfacesOne port: 10/100BASE-T half/full duplex, 1000BASE-T full duplex
Automatic or manual detection of straight/crossover cable
Electrical Ethernet interfaces (table)Model: Connector on module | FTB-85919 SFP to RJ45 adapter
Transceiver type: 10BASE-T | 100BASE-TX | 1000BASE-T | 1000BASE-T
Tx bit rate: 10 Mbit/s | 125 Mbit/s | 1 Gbit/s | 1 Gbit/s
Tx accuracy (uncertainty) (ppm): ±4.6 | ±4.6 | ±4.6 | ±4.6
Rx bit rate: 10 Mbit/s | 125 Mbit/s | 1 Gbit/s | 1 Gbit/s
Rx measurement accuracy (uncertainty) (ppm): ±4.6 | ±4.6 | ±4.6
Duplex mode: Half and full duplex | Half and full duplex | Full duplex | Full duplex
Jitter compliance: IEEE 802.3 | IEEE 802.3 | IEEE 802.3 | IEEE 802.3
Connector: RJ45 | RJ45 | RJ45 | RJ45
Maximum reach (m): 100 | 100 | 100 | 100
Synchronization interfaces (MAX-860, MAX-860G, MAX-880)External Clock DS1/1.5M; External Clock E1/2M; External Clock E1/2M Trigger 2 MHz
Tx pulse amplitude: 2.4 to 3.6 V | 3.0 V | 2.37 V | 0.75 to 1.5 V
Tx pulse mask: GR-499 Figure 9-5 | G.703 Figure 15 | G.703 Figure 15 | G.703 Figure 20
Tx LBO preamplification typical power dBdsx: +0.6 dBdsx (0 to 133 ft); +1.2 dBdsx (133 to 266 ft); +1.8 dBdsx (266 to 399 ft); +2.4 dBdsx (399 to 533 ft); +3.0 dBdsx (533 to 655 ft)
Rx-level sensitivity (at 772 kHz for T1): TERM: ≤6 dB (cable loss only); DSX-MON: ≤26 dB (20 dB resistive loss + cable loss ≤6 dB); Bridge: ≤6 dB (cable loss only)
Rx-level sensitivity: TERM: ≤6 dB (cable loss only); MON: ≤26 dB (20 dB resistive loss + cable loss ≤6 dB); Bridge: ≤6 dB (cable loss only)
Rx-level sensitivity: TERM: ≤6 dB (cable loss only); MON: ≤26 dB (20 dB resistive loss + cable loss ≤6 dB); Bridge: ≤6 dB (cable loss only)
Rx-level sensitivity: ≤6 dB (cable loss only)
Transmission bit rate: 1.544 Mbit/s ± 4.6 ppm | 2.048 Mbit/s ± 4.6 ppm | 2.048 Mbit/s ± 4.6 ppm
Reception bit rate: 1.544 Mbit/s ± 50 ppm | 2.048 Mbit/s ± 50 ppm | 2.048 Mbit/s ± 50 ppm
Intrinsic jitter (Tx): ANSI T1.403 section 6.3; GR-499 section 7.3 | G.823 section 6.1 | G.823 section 6.1 | G.703 table 11
Input jitter tolerance: AT&T PUB 62411; GR-499 section 7.3 | G.823 section 7.2; G.813 | G.823 section 7.2; G.813 | G.823 section 7.1; G.751 section 3.3
Line coding: AMI and B8ZS | AMI and HDB3 | AMI and HDB3
Input impedance (resistive termination): 75 Ω ± 5 %, unbalanced | 75 Ω ± 5 %, unbalanced | 75 Ω ± 5 %, unbalanced | 75 Ω ± 5 %, unbalanced
Connector type: BNCa | BNCa | BNC | BNC
a. Adaptation cable required for BANTAM.
General specifications
Size (H x W x D)MAX-860: 210 mm x 254 mm x 66 mm (8 ¼ in x 10 in x 2 5/8 in)
MAX-860G: 210 mm x 254 mm x 66 mm (8 ¼ in x 10 in x 2 5/8 in)
MAX-880: 210 mm x 254 mm x 66 mm (8 ¼ in x 10 in x 2 5/8 in)
MAX-890: 210 mm x 254 mm x 96 mm (8 ¼ in x 10 in x 3 7/8 in)
MAX-890Q: 210 mm x 254 mm x 122 mm (8 ¼ in x 10 in x 4 ¾ in)
Weight (with battery)MAX-860: 2.1 kg (4.6 lb)
MAX-860G: 2.5 kg (5.6 lb)
MAX-880: 2.6 kg (5.7 lb)
MAX-890: 2.99 kg (6.59 lb)
MAX-890Q: 4.16 kg (9.17 lb)
TemperatureOperation: 0 °C to 40 °C (32 °F to 104 °F)c
Storageb: –40 °C to 70 °C (–40 °F to 158 °F)
Relative humidity0% to 95%, non-condensing
ProcessingMAX-860 / MAX-860G / MAX-880: Dual-core processor / 4 GB RAM / Windows 10
MAX-890 / MAX-890Q: Quad-core processor / 4 GB RAM / Windows 10
DisplayMultitouch, widescreen, color, 1280 x 800 TFT 203 mm (8 in)
InterfacesRJ45 LAN 10/100/1000 Mbit/s
Two USB 2.0 ports
One USB 3.0 port
Micro SD card slot
3.5 mm headset/microphone port
StorageMAX-860 / MAX-860G / MAX-880: 64 GB internal memory (flash)
MAX-890 / MAX-890Q: 128 GB internal memory (flash)
BatteryMAX-860 / MAX-860G / MAX-880 / MAX-890: Rechargeable Li-ion smart battery
MAX-890Q: 2 rechargeable Li-ion smart batteries
Power supplyMAX-860 / MAX-860G / MAX-880 / MAX-890: AC/DC adapter, input: 100–240V; 50/60 Hz; 2.5 A max, output: 24 V; 3.75 A
MAX-890Q: AC/DC adapter, input: 100–240V; 50/60 Hz; 4 A max, output: 24 V; 8.33 A
a. All specifications valid at 23 °C (73 °F). b. Battery storage temperatures: –20 °C to 60 °C (–4 °F to 140 °F) for shipping, and –20 °C to 45 °C (–4 °F to 113 °F) for long-term storage. c. With the MAX-890Q, when testing 4 x 100GE EtherBERT Layer 2, the maximum operation temperature is 35ºC or 95ºF.