740C xWDM OTDR Series

Características principales

CWDM+DWDM combo available in compact FTB-1v2

C-BAND ITU DWDM grid channels 12-62 selection in a single OTDR port

18 CWDM channels covered in one OTDR port scalable to your deployments

Test through MUX/DEMUX/OADM

In-service testing of active networks

iOLM’s SFP-Safe Troubleshooting: guarantees no damage to SFP

Aplicaciones

C-RAN

Fiber Deep

Metro

Remote PHY

Especificaciones

Especificaciones
Calibrated wavelengths	1270 / 1290 / 1310 / 1330 / 1350 / 1370 / 1390 / 1410 / 1430 / 1450 / 1470 / 1490 / 1510 / 1530 / 1550 / 1570 / 1590 / 1610
Compatibilidad con EXFO Exchange	Sí
Dynamic range (dB)	37 dB (model CWDM), 40 dB (model DWC)
iOLM-ready	Sí
Product type	Module
Prueba de tipo	Fault location / Fiber characterization / Fiber length / Loss / ORL

Hoja de especificaciones

Descripción

This series includes one CWDM tunable OTDR module to cover all 18 CWDM channels from a single port and one DWDM tunable OTDR module to cover DWDM C-Band channels. This solution is available in the FTB-1V2, FTB-2 and FTB-4 platforms.

The 740C xWDM OTDR series has been designed with EXFO’s renowned high-quality standards to stabilize central wavelength under test, preventing any drift/leakage into adjacent channels, which would otherwise affect other valuable customers.

This OTDR is a scalable solution that can grow with your network by adding channels further down the road, hence allowing CAPEX reduction while covering your current and future needs.

The OTDR’s user-friendly interface lets the technician define a list of favorite channels over the C-Band (DWDM) or CWDM grid (CWDM) for quicker access and a more efficient test routine.

CWDM and DWDM: the answer to future bandwidth growth

CWDM and DWDM are gaining popularity for passive C-RAN or commercial services deployments such as fiber deep, Remote PHY and metro Ethernet in which each wavelength can address a specific site, such as a cell tower. Both CWDM and DWDM approaches are not mutually exclusive and co-exist in hybrid passive networks that feature DWDM over CWDM to maximize fiber capacity.

Use a xWDM tunable OTDR for:

Single-ended CWDM/DWDM fiber characterization
Validating the continuity and end-to-end loss through MUX, OADM and DEMUX, during construction
In-service testing using the client’s wavelengths port—without any downtime or impacting other client wavelengths
Troubleshooting and characterization by a single operator from the head-end