| Modelsa | Channel 1: 1309.14 nm / 229.0 THz; Channel 2: 1304.58 nm / 229.8 THz; Channel 3: 1300.05 nm / 230.6 THz; Channel 4: 1295.56 nm / 231.4 THz |
| Channel centera | Grid matched |
| Tuning range (nm)a | 1.6 (1.8 typical) |
| Wavelength accuracy (nm)b | ±0.03 |
| Wavelength stability over 1 hour (nm)b, c, d | ±0.005 |
| Wavelength stability over 24 hours (nm)b, c, d | ±0.005 typical |
| Maximum output power (mW) | 10 |
| Power stability over 1 hour (dB)b, c, d | ±0.01 |
| Power stability over 24 hours (dB)b, c, d | ±0.01 typical |
| Optical isolation (dB) | > 30 |
| Relative intensity noise (RIN) (dB/Hz)e | < –130 |
| Laser line width (MHz) | < 10 |
| SMSR (dB)b | > 30 (40 typical) |
| TTL modulation (internal) | 1 Hz to 890 kHz |
| TTL modulation (external) | 16 Hz to 890 kHz |
| Analog modulation (external/front panel) | 150 Hz to 150 MHz |
| SBS suppression (internal) – waveform | Sine |
| SBS suppression (internal) – frequency range (kHz) | 10 to 100 |
| SBS suppression (internal) – modulation depth (%) | 0 to 15 |
| Optical fiber | SMF; PM13 |
| Fiber alignment to connector key | SMF: n/a; PM13: Slow axis |
| Polarization extinction ratio (PER) (dB) | SMF: n/a; PM13: > 17 |
| Optical connector | FC/APC narrow key |
| Electrical connector | Coaxial SMB – 50 Ω |
| a. Location of channel center: lower boundary of the range + 0.4 nm < channel center < upper boundary of the range –0.4 nm. b. After warm-up and at maximum power. c. At a constant temperature. d. Measured with an APC terminated jumper on a powermeter. e. RIN within the range 100 MHz–20 GHz measured at 10 dBm output power with RBW = 30 kHz. f. See OSICS mainframe specifications sheet for details on OSICS common specifications and interfaces on the rear panel. | |
| Laser safety | Class 1M |
| Dimensions (W × H × D) | 35 mm × 128 mm × 230 mm (1 3/8 in × 5 in × 9 in) |
| Weight | 1.1 kg (2.43 lb) |