Gear up for NBN Unify

Carrier-grade optical and copper testers with built-in expertise

Find faults and close jobs fast and reliably.

With the smartest testers utilised by Telstra and NBN, test right the first time, every time.

All you need to test FTTN, FTTP, FTTB and FTTC!

Products below come with a 3-year warranty!

FTBx-730C OTDR module in FTB-1v2 platform

Designed for PON FTTx and MDU applications. Test through high port-count splitters up to 1x128 with a dynamic range of 39 dB.

Test through high-port-count splitters (up to 1x128)
Singlemode port for in-service troubleshooting with in-line 1490/1550 nm power meter
Dynamic range of up to 39 dB

FIP-435B fiber inspection scope

100% automated, one-step inspection process, with onboard connector endface analysis (IEC, IPC or custom standards) and all-day battery life.

100% automated, one-step inspection process
Screenless operation with pass/fail LED indicator
On-board connector endface analysis (IEC, IPC or custom standards)

MAX-800 Series of Ethernet testers

Cover RFC 2544, EtherSAM ITU-T Y.1564, EtherBERT, traffic generation and monitoring (multistream) and smart loopback.

Comprehensive testing for DSn/PDH, ISDN, SONET/SDH, OTN and Ethernet interfaces up to 100 Gbit/s
Quad-port testing up to 4 x 100GE links, enabling technicians to run up to four independent tests
OTN testing (as per ITU-T G.709), including forward error correction (FEC)

MAX-635G copper and xDSL tester

Copper characterization to 35 MHz and DSL/VDSL analysis for installation and maintenance of ultra broadband. Speedtest® powered.

Gfast with backwards compatibility to VDSL2 and ADSL2+ with one test tool
Compatible with EXFO Connect for cloud-based test asset management
Spectrally compatible VDSL2 35b support and, VDSL2 and ADSL2+ bonding

Optical Power Expert (PX1) power meter

Bluetooth® connectivity, a wide touchscreen and best-in-class optical performance.

User-friendly: compact, color touchscreen and intuitive GUI
Robust and rugged: IP54 design for dust and water protection
Time-saving features: no offset nulling, lightning-fast boot-up

Optical Explorer (OX1), the first optical fiber multimeter

Assess the quality of fiber rollouts in seconds. Unleash intelligent fault tracking, automatically only when necessary. Designed for installation, service activation and repair, including in-service testing of singlemode links up to 40 km.

Displays fiber length, loss and optical return loss (ORL) in under 3 seconds
On-the-spot detection and location of common causes of failures
Intelligent: no settings required make it an essential for any frontline technician’s toolkit

EXFO testers are highly intuitive and require minimal training.
We are also renowned for our round-the-clock dedicated customer care.

Gear up for NBN Unify

Find faults and close jobs fast and reliably.

All you need to test FTTN, FTTP, FTTB and FTTC!