Active
Discontinued
Newest
 
 
100G Deployment
Watch the interview
 

10 Gigabit Ethernet Test Module — IQS-8510G Packet Blazer

 

Delivers performance assurance for Ethernet-based frame services; provides all the measurements required for validating traffic, loading and service-level agreements (SLAs) between network elements.

Technical Information

Download spec sheetlogo, IPv6, Complete IPv6 Testinglogo, EtherSAM

 



Applications

  • Performance validation of carrier-grade 10 Gigabit Ethernet services
  • End-to-end characterization and SLA validation

Key Features

  • LAN and WAN PHY capability in a single module
  • Fully integrated functionality for assessing the performance of Ethernet transport networks
  • Complete EtherSAM (ITU-T Y.1564) test suite. EtherSAM is the new standard for turning up and troubleshooting mobile backhaul and business Ethernet services
  • Throughput, burstability (back-to-back), latency and frame loss measurements as per RFC 2544
  • EtherBERT™ test functionality for assessing the integrity of 10 Gigabit Ethernet running on WDM networks
  • Multistream generation and analysis, allowing quality of service (QoS) verification through VLAN and TOS/DSCP prioritization testing
  • MPLS, MPLS-TP, PBB-TE and IPv4/IPv6 support for complete Carrier Ethernet validation
  • Part of EXFO's unified layer 0/1/2/3/4 testing solution

The Choice for 10 Gigabit Ethernet Performance Assurance

EXFO’s IQS-8510G Packet Blazer™ is a fully featured 10 Gigabit Ethernet test and measurement module that offers performance assurance for Ethernet-based framed traffic. Its suite of test applications provides all the measurements required for validating traffic, loading and service-level agreements (SLAs) between network elements.

The IQS-8510G module supports LAN/WAN PHY and is capable of testing signals in their native format, such as 10GBASE-xR or 10GBASE-xW, which are typically used for transport of Ethernet-based LAN-to-LAN services. It is also ideal for testing next-generation SONET/SDH platforms, hybrid multiplexers, dark fiber or xWDM networks running 10 Gigabit Ethernet interfaces. Whether in a manufacturing, lab or R&D environment, EXFO’s Packet Blazer series (IQS-8510B/8510G) of modules simplifies and speeds up the development and deployment of Ethernet-based technology.

Key Features

  • Measures throughput, back-to-back (burstability), latency and frame loss as per RFC 2544
  • EtherBERT™ for bit-error-rate testing of 10 Gigabit Ethernet circuits
  • Performs packet jitter measurement (IP packet-delay variation as per RFC 3393) to qualify Ethernet transport networks for transmission of delay-sensitive traffic such as voice-over-IP (VoIP)
  • Q-in-Q capability with the ability to go up to three layers of stacked VLANs
  • LAN PHY and WAN PHY available in a single module
  • Simultaneous traffic generation and reception at 100 % wire speed for 10GBASE-SR, -ER, -LR, -SW, -EW or -LW full-duplex interfaces at all frame sizes
  • UDP, TCP and IP header integrity validation
  • Expert mode capability for defining test pass/fail thresholds
  • Fully complies with the IEEE’s 802.3ae standard
  • Pluggable XFP optical module
  • End-to-end testing using Smart Loopback
  • Service disruption test measurement
  • Transmits and analyzes up to ten streams, providing per-stream measurements for throughput, latency, frame loss and packet jitter
  • Bidirectional RFC 2544
  • Remotely controllable through Visual Guardian Lite software or VNC
  • Configurable advanced filters for in-depth network troubleshooting
  • PBB-TE and MPLS support for Carrier Ethernet
  • Internet protocol version 6 (IPv6 testing)

Manufacturing, Lab and R&D Environments

The one-slot IQS-8510G Packet Blazer module is housed in the IQS-600 Integrated Qualification System, a rack-mount platform ideal for manufacturing, lab and R&D environments. The IQS-600 platform offers up to ten slots that can welcome any combination of modules from EXFO’s full range of industry-proven protocol and optical test modules—a first in the industry.

Related Resources

 
Sort by:
12
 

The IQS-8510G Packet Blazer provides all the measurements required for validating traffic, loading and service-level agreements (SLAs) between network elements.

Last updated: 2011-09-26

This application note presents how to ensure that Ethernet links are ready for the high-quality services customers are demanding and how to turn SLAs into sales tools that help service providers attract and retain customers.

Last updated: 2011-08-22

This application note discusses the importance of QoS and offers QoS testing methods when activating data services.

Last updated: 2011-08-22

This technical note provides an overview of Gigabit Ethernet, positioned to be a key technology in LAN, access, metro, and long-haul network deployments.

Last updated: 2011-08-22

12

There are no registered products.

Manage my products
Contact Technical Support (Wireline)
Latin America Visitors
North America Visitors
...
Americas

Toll-free: +1 866 683 0155 (USA and Canada)
Tel.: +1 418 683 5498 (Other countries)

.

 

Europe Visitors
Europe

Toll-free: +800 2255 3936
Tel.: +44 2380 246 800

.
Asia-Pacific Visitors
Asia-Pacific

Tel.: +65 6333 8241

.
China visitors
China

Tel.: +86 10 5825 7755
Technical Support Hotline: 400-818 2727

.
TypeNameReleasedDescription
Packet Blazer 8510G
v2.14 SP3 - IQS Manager 3 See all versions
Aug. 2013

10 Gigabit Ethernet test module software pack: a fully integrated test solution for performance assessment of 10 GigE WAN and LAN rates for total network testing.

Download Area
LabView Drivers 8xxx
v1.0 - Utilities See all versions
Apr. 2010

EXFO drivers for LabView.

Download Area