Active
Discontinued
Newest
 
 
High-Speed Product Portfolio
Browse the brochure
 
 
100G CFP Health Check
Read the article
 
 
Network Equipment Manufacturers
Browse the brochure
 

40G/100G Multiservice Test Module — IQS-85100G Packet Blazer

 

EXFO’s 40G/100G integrated multiservice testing solution for carrier labs and the NVS market.

Technical Information

logo, iSam

logo, IPv6

logo, EtherSAMlogo, CFP Health Checklogo, CFP2 Ready

 



Key Features

  • 40G/100G Ethernet fully compliant with IEEE 802.3ba standard and OTU3/OTU4 as per ITU-T G.709 and OC-768/STM-256 testing capabilities—all in a single module
  • OTU3/OTU4 and OTU3e1/e2 with forward error correction (FEC) and optical transport layer (OTL) testing capabilities as software options
  • 40G/100G Ethernet mapping and SONET/SDH mapping over OTN, OTU3/OTU4 single and multistage multiplexing, and ODUflex capabilities for transponder and muxponder testing
  • 40G/100G IP traffic at 100% transmission with full Ethernet statistics, clear pass/fail verdicts, packet capture and advanced traffic filtering capabilities
  • Enhancing the 40G/100G Ethernet stack with support for IPv6 protocol capability for transition IP stack testing
  • Faster Ethernet service activation with EtherSAM (ITU-T Y.1564) service configuration and performance tests, as well as RFC 2544 test suites complemented by remote discovery, Smart Loopback and Dual Test Set capabilities
  • iSAM ultra-simple ITU-T Y.1564 and RFC 6349 service activation methodology
  • 40G/100G Ethernet traffic generation and monitoring with up to 16 fully configurable streams to simulate a multiservice offering and complete QoS results to fully qualify SLA parameters
  • Fully integrated testing capabilities for assessing CFP MSA optical modules and physical-layer performance: PCS into CAUI/XLAUI, logical into physical mappings, skew testing, advanced signal conditioning and full MDIO access
  • Single instrument for carrier lab qualifications and NEM applications with 40G/100G multiservice offering, remote management, predefined user configurations and complete automation capabilities

Applications

  • Powerful CFP-based layer-1/2/3 Ethernet traffic generation and analysis to stress and validate network infrastructure elements against demanding corner cases
  • 100GBASE-LR4/ER4 and 40GBASE-LR4 optical parameter validation (in conjunction with other EXFO products)
  • Rapid validation of IEEE 802.3ba physical-layer performance metrics using industry-leading PCS testing capabilities (PCS lanes, markers, skews and underlying CAUI and XLAUI testing)
  • Thorough certification of 100 Gbit/s Ethernet and 40 Gbit/s Ethernet CFP, CXP and QSFP transceiver characteristics and performance

ETHERNET AND SONET/SDH MAPPING OVER OTU3/OTU4

EXFO’s IQS-85100G Packet Blazer offers 40G/100G Ethernet and SONET mapping capability over OTU3/OTU4 through EoOTN or SONET/SDH software options. This key testing capability provides the following benefits:

  • Enables network solution vendors (NSVs) to qualify their 40G/100G transponder development (such as mapping and demapping capabilities), in addition to client signal timing transparency.
  • Provides the 40 GigE-specific transcoding capability that must be qualified to ensure that the 40 GigE frame is properly transcoded from 64B/66B to 1024B/1027B, and properly mapped into the OTU3 (43G) standard frame.

With the IQS-85100G Packet Blazer, customers can:

  • Map 40G/100G Ethernet clients or SONET/SDH over optical transport network (OTN) with different traffic characteristics.
  • Run end-to-end bit-error-rate (BER) tests across an OTN and measure the ratio of error bits to the number of sent bits (the IQS-85100G Packet Blazer module provides complete analysis of the OTN transport layers, including OTU/ODU/OPU and generic-mapping-procedure (GMP) statistics to ensure proper recovery of the client signal at the receive end and complete SONET/SDH analysis.
  • Leverage EXFO’s EoOTN testing capability to validate 40G/100G Ethernet traffic transmission with 100% throughput, and ensure that latency does not impact service providers’ service-level agreements (SLAs) with customers.

ETHERNET PERFORMANCE VALIDATION

The IQS-85100G Packet Blazer supports the RFC 2544 test suite for 40G and 100G Ethernet interfaces at all frame sizes and at full line rate, enabling service providers to certify that the circuit is efficient and error-free at 100% utilization. In addition, it supports automated RFC 2544 testing, which helps ensure repeatable results.

The IQS-85100G’s RFC 2544 testing capabilities also include five Smart Loopback modes offering the following features and benefits:

  • Provide the flexibility to adjust to all loopback situations: pinpoint loopback traffic from a user-datagram protocol (UDP) or transmission control protocol (TCP) layer, or all the way down to a completely promiscuous mode (Transparent Loopback mode).
  • Enable end-to-end testing through which the remote unit will return traffic to the local unit by swapping packet overhead up to layer 4 of the open-systems-interconnection (OSI) stack.
  • Enable manufacturers and carriers to ensure optimal performance of 40G/100G optics during lab evaluations.

ETHERSAM: ITU-T Y.1564 ETHERNET SERVICE ACTIVATION

Supported on the IQS-85100G Packet Blazer module for 40G/100G Ethernet services, this new methodology brings numerous advantages, including:

  • Validation of critical SLA criteria such as packet jitter and quality-of-service (QoS) measurements
  • Faster time-to-service
  • EtherSAM test suite: Based on the ITU-T Y.1564 Ethernet service activation methodology, this EXFO innovation is capable of simulating all the types of services running on the network and simultaneously qualifying all the key SLA parameters for each of these services.

Download the specification sheet for full product details.

Related Resources

 
Sort by:
123
 
Last updated: 2016-01-21

This application note discusses EXFO’s new, intelligent iSAM service activation methodology based on the ITU-T Y.1564 and RFC 6349 standards, which leverages repeatable and automated test processes to simplify and speed up Ethernet and TCP layer-4 testing for greater efficiency and faster time-to-revenue.

Last updated: 2015-10-29

Deploying networks using CFP transceivers presents a set of challenges that did not exist with previous generations of Ethernet. Any CFP-based 100G Ethernet deployment will commonly use a WDM interface. This, in itself, is enough to require a new set of skills and tools to support network deployments. When deploying networks that use CFP transceivers, challenges arise where there were none in previous Ethernet generations

Last updated: 2014-03-10

All across the world, the number of 100G network deployments is growing. Mostly done in the network service providers’ core network, the objective of these deployments is either to add capacity or aggregate multiple existing 10G services. In such scenarios, the lineside uses coherent 100 Gbit/s transmission to reduce the
signaling rate while maintaining the 100G data rate. This is achieved using advanced modulation techniques, like DP-QPSK, on channels within the DWDM network.

Last updated: 2014-03-10

123

There are no registered products.

Manage my products
Contact Technical Support (Wireline)
Latin America Visitors
North America Visitors
...
Americas

Toll-free: +1 866 683 0155 (USA and Canada)
Tel.: +1 418 683 5498 (Other countries)

.

 

Europe Visitors
Europe

Toll-free: +800 2255 3936
Tel.: +44 2380 246 800

.
Asia-Pacific Visitors
Asia-Pacific

Tel.: +65 6333 8241

.
China visitors
China

Tel.: +86 10 5825 7755
Technical Support Hotline: 400-818 2727

.