Prompt Diagnosis
Let it show you the way
Loaded with countless algorithms and a database of potential network failures, the iOLM guides you through your network’s problem-solving process. Say goodbye to trace misinterpretation, and ensure that all your technicians—not just your most experienced ones—can efficiently fix network issues right on the spot.
In-Line Optical Power Meter
Let it fast-track troubleshooting
Connect, check power readings, get a link map and find the fault—all in one click and without disconnecting the fiber. Gear up for lightning-fast troubleshooting.
Mandatory: Angled-Polished (APC) Connectors
As any OTDR, the iOLM will be impacted by strong reflections at the unit’s port. To ensure low reflections and maintain measurement accuracy, the iOLM must be used with APC connectors. Another advantage of using APC connectors is their ability to handle harsher conditions without becoming highly reflective while maintaining the unit’s performance.
In the case of UPC connectors, they are prone to be highly reflective if contaminated, worn or damaged. This will affect the measurement and will lead to premature connector replacement. Although, testing a UPC network does not require a UPC unit, using an APC/UPC test jumper (included with the iOLM) or a launch fiber (SPSB) ensures compatibility.
Recommended Test Method
EXFO recommends using a 150-meter launch cable (SPSB) to exclude the loss of the iOLM’s connector or to allow UPC network testing. It will also extend the instrument’s connector life by reducing the number of matings—ultimately improving the cost of ownership.