DSn/PDH and SONET/SDH Service Turn-up and Troubleshooting
The IQS-8105 Transport Blazer module offers a wide range of TDM and SONET/SDH test functions, allowing users to perform tests ranging from simple bit error rate (BER) testing to advanced characterization and troubleshooting procedures. These functions include:
- Mixed and bulk payload generation and analysis from 64 kbit/s to 155 Mbit/s
- High-order mappings: STS-1/3c and AU-3/AU-4
- Low-order mappings: VT1.5/2/6 and VC-11/12/2/3
- Section/RS, line/MS, high-order (HO) and low-order (LO) path overhead manipulation and monitoring
- Section/RS, line/MS, high-order and loworder path alarm/error generation and monitoring
|
- High-order and low-order pointer generation and monitoring
- Tandem connection monitoring
- Performance monitoring: G.821, G.826, G.828, G.829, M.2100, M.2101
- Frequency analysis and power measurement
- Frequency offset generation
- Automatic protection switching and service disruption time measurements
- Round-trip delay measurements
|
- Independent transmitter and receiver testing
- Through mode analysis
- Programmable error/alarm injection
- DS1/DS3 auto-detection of line code, framing and test pattern
- Dual DS1/DS3 receiver testing
- DS1 FDL
- DS1 loopcodes and NI/CSU loopback
- Fractional T1/E1 testing
- DS3 FEAC
|
SmartMode: Real-Time Signal Structure Discovery and Monitoring
EXFO’s IQS-8105 Transport Blazer module offers a unique feature called SmartMode. This provides users with full visibility of all high-order (STS/AU) and low-order (VT/TU) mixed mappings within the incoming SONET/SDH electrical test signal.
SmartMode automatically discovers the signal structure of the STS-n/STM-n electrical rate line, including mixed mappings and virtual concatenation (VCAT) members. In addition to this in-depth multichannel visibility, SmartMode performs real-time monitoring of all discovered high-order paths and user selected low-order paths simultaneously, providing users with the industry’s most powerful SONET/SDH multichannel monitoring and troubleshooting solution. Real-time monitoring allows users to easily isolate network faults, saving valuable testing. SmartMode also provides one-touch test case start, allowing users to quickly configure a desired test path.
Unsurpassed Configuration and Operational Flexibility
Remote Management
The Visual Guardian Lite™ remote management software, supported on all the Transport Blazer and Packet Blazer modules, provides the user with a remote connection to the instrument’s graphical user interface. This identical view of the GUI is supported on any Windows-based workstation and allows for simplified remote testing and data analysis, as well as remote monitoring. Up to five simultaneous Visual Guardian Lite sessions can be supported per test module via a standard Ethernet connection to the platform. For remote testing applications, the Visual Guardian Lite software must be ordered separately.
Automated Test Scripting
The IQS-8105 Transport Blazer supports two methods for automated test scripting. First, by using industry-based SCPI commands, and second, by using a built-in macro recorder that facilitates the recording of test actions and allows to automatically create test scripts. These test scripts can be used as the basis for larger automation routines that can be created in any .NET environment.
Test Logger and Reporting
EXFO’s IQS-8105 Transport Blazer module supports a detailed test logger and test reporting tools, enabling users to view any errors/alarms that occurred during the test interval, which can then be used for post-processing of results or SLA conformance validation.
IQS-600 Integrated Qualification System
The IQS-8105 Transport Blazer modules are housed in the IQS-600 Integrated Qualification System, a scalable modular rack-mount platform that houses a controller, expansion units and a comprehensive range of plug-in test modules ideal for manufacturing, lab and R&D environments. The IQS-600 platform offers up to ten slots that can support any combination of modules from EXFO’s full range of industry-proven protocol and optical test modules. Systems can be expanded to support up to 100 test modules. The IQS-600 family is comprised of the IQS-610P, a ten-slot control unit that can support up to nine IQS-610E ten-slot expansion units, and the IQS-605P, a five-slot control unit with an integrated touchscreen.
Combined with the built-in IQS Manager software, the IQS-600 platform provides an easy-touse environment to manage your modules, configure your system, launch applications and analyze results. The IQS-600 is supplied with LabVIEW drivers and ActiveX/COM interfaces. What’s more, it can be controlled using local applications or through GPIB, RS-232 or Ethernet interfaces.