A Complete Fiber Certification Solution
In addition to a power meter, fiber certification requires a light source, namely the FLS-600 Light Source, which comes with the AXS-200/360 kit.
- Up to three singlemode wavelengths (1310, 1550, and 1490 or 1625 nm) on a single port, or four wavelengths (850/1300 nm and 1310/1550 nm) on two ports
- New controlled multimode launching conditions for reliable loss measurements
- Three-year warranty for low cost of ownership
- Full-fledged unit that can be used for other test applications
An Essential Fiber Certification Tool for Enterprise, Installers and Contractors
AXS-200/360 key features and benefits
- Industry standards support: Offers user-configurable thresholds, consistent with industry standards: TIA/TSB-178, TIA/EIA-568-B.3, ISO/IEC-11801, 10GBASE-LX4, 10GBASE-L, 10GBASE-E, 10GBASE-S, 1000BASE-SX, 1000BASE-LX, 100BASE-FX, 10BASE-FB, 10BASE-FL, FDDI, ATM-155, ATM-622, Token Ring 4 and 16 Mbit/s, Fibre Channel 1062 Mbit/s, Corning plug and play.
- AXS-200 SharpTESTER platform main characteristics—modularity, connectivity, weather-proof and color display: Expands with your network and service test requirements, covering copper/DSL/triple-play, Ethernet and other optical applications; transflective screen for optimal viewing; easy data transfer via USB connection.
- FIP support: Ensures that you perform a connection with clean connectors/adapters, exempt from any defect.
- Step-by-step fiber loss wizard: Guides the user through quick procedures, limiting testing time and operator errors.
- User-friendliness: Displays straightforward, automated test results with user-definable pass/fail criteria, without requiring interpretation; possibility to interchange connectors for perfect referencing setup.
- Low cost of ownership: Allows you to bid on more contracts, thanks to this dedicated fiber tester that certifies singlemode and multimode fiber networks; offers a three-year warranty and recommended calibration interval; is less expensive than major competitors’ instruments.
FLS-600 Key Features and Benefits
- Automatic wavelength switching: Offers automated toggling between wavelengths thanks to the Auto-Switching mode; this feature enables the AXS-200/360 to recognize the wavelength in use and switch to the proper calibration parameters.
- Distant referencing: Sends a signal remotely, giving the power meter information on the source wavelength and output power to be used as reference and helping ensure efficient referencing—even when the source and power meter are far apart.
- Controlled multimode launching conditions: Designed to conform to the proposed encircled flux standards, providing the most reliable loss measurements.
Fiber Testing Made Easy
Network Certification in Four Easy Steps
- Select a standard or an application.
- Follow the step-by-step fiber loss wizard.
- Set reference.
- Start the test.
The AXS-200/360 automatically completes loss measurements at 850 and 1300nm (MM) or 1310 and 1550 nm (SM), compares results against industry standards such as TIA-568-B and provides pass/fail analysis in compliance with those standards.
Retest Fibers as Needed
If the loss measured is above the budget, the fiber can easily be retested.
View all Results at a Glance
Once the cable is completely tested, the AXS-200/360 displays a table of all measurement values along with pass/fail status, based on user-inputted fiber lengths.
Connector Inspection and Cleaning
It’s a fact: Most fiber network problems are caused by dirty, damaged or improperly installed connectors, which can lead to erroneous test results or poor transmission. Using a FIP to ensure connectors/adapters are clean and exempt from any defect is where accurate testing starts.
Avoid failing certification testing thanks to the FIP port on the AXS-200/360. Just plug EXFO’s efficiently designed FIP-400 Fiber Inspection Probe and benefit from an unmatched optical resolution. Moreover, keep snapshots of your connectors for future reference and documentation.
Facilitating Troubleshooting
Troubleshoot link problems such as bad splices, macrobendings and fiber breaks using EXFO’s visual fault locator. The VFL’s bright red light helps you visually locate many near-end fiber faults and tests polarity. With this valuable and cost-efficient option, you will benefit from another opportunity to expand your business.
Comprehensive Certification Reports Using Optical Report Viewer
Save, upload, manage and print comprehensive certification reports with EXFO’s Optical Report Viewer. Among its numerous features, this software’s pass/fail thresholds, which are active during download, are automatically activated and displayed in the Report Viewer. It also enables you to produce professional-looking reports with detailed documentation.